Pagina principale: differenze tra le versioni

Da MechWiki.
Vai alla navigazione Vai alla ricerca
← Differenza precedenteDifferenza successiva →
VisualeWikitesto
Stefano Menozzi (discussione | contributi)
nsPrivateRO, nsPrivateRW, nsPrivate_talkRO, nsPrivate_talkRW
1 439 modifiche
Stefano Menozzi (discussione | contributi)
nsPrivateRO, nsPrivateRW, nsPrivate_talkRO, nsPrivate_talkRW
1 439 modifiche
Riga 18: Riga 18:




* [[Private:IMAL Srl]]
 
* [[Private:IMAL Srl - eng]]
* [[Private: MECH Tekla Settings]]
* [[Private:Impostazioni Tekla per Mech]]
* [[Private:Responsabile]]
* [[Private:Responsabile]]


Riga 44: Riga 41:
*  [[Private:International codes]]
*  [[Private:International codes]]
*  [[Private:Australian Code ]]
*  [[Private:Australian Code]]
*  [[Private:German Code ]]
*  [[Private:German Code]]
*  [[Private:American Code ]]
*  [[Private:American Code]]
*  [[Private:Chinese Code ]]
*  [[Private:Chinese Code]]
*  [[Private:Maximum permissible hole diameter in IPE, HEA and HEB]]
*  [[Private:Maximum permissible hole diameter in IPE, HEA and HEB]]
*  [[Private:Maximum permissible hole diameter in IPE, HEA and HEB]]
*  [[Private:Maximum permissible hole diameter in IPE, HEA and HEB]]
Riga 62: Riga 59:
   *  [[Private:Setting of solid edge file’s properties ]]
   *  [[Private:Setting of solid edge file’s properties ]]
   *  [[Private:Coding for “cut and perforate” and “welded assemblies”]]
   *  [[Private:Coding for “cut and perforate” and “welded assemblies”]]
   *  [[Private:Ballarini Socama ]]
   *  [[Private:Ballarini Socama]]
   *  [[Private:Euromeccanica ]]
   *  [[Private:Euromeccanica]]
   *  [[Private:Frigorbox ]]
   *  [[Private:Frigorbox]]
   *  [[Private:Tabarelli – MECH – Frigorbox (carpentry) ]]
   *  [[Private:Tabarelli – MECH – Frigorbox (carpentry)]]
   *  [[Private:Setting of solid edge draft files ]]
   *  [[Private:Setting of solid edge draft files]]
   *  [[Private:Settings lines and texts in *.dft ]]
   *  [[Private:Settings lines and texts in *.dft]]
   *  [[Private:Rescue procedure dft→dwg with colors’ planning ]]
   *  [[Private:Rescue procedure dft→dwg with colors’ planning]]
   *  [[Private:Procedures for solid edge designing ]]
   *  [[Private:Procedures for solid edge designing]]
   *  [[Private:Check in the draft ]]
   *  [[Private:Check in the draft]]
 
*  [[Private:AutoCAD – illustration details]]
  *  [[Private:Cugini Malagoli]]
  *  [[Private:Ballarini Socama]]
  *  [[Private:Euromeccanica]]
  *  [[Private:Frigorbox]]
  *  [[Private:Mech]]
  *  [[Private:Tabarelli]]
 
*  [[Private:Various about modeling]]
*  [[Private:Staircases and parapets]]
*  [[Private:Staircases]]
*  [[Private:Bolts and fixings]]
*  [[Private:Dowels]]
*  [[Private:Chemical]]
*  [[Private:Turnbuckles]]
*  [[Private:Screws]]
*  [[Private:Bolts]]
*  [[Private:Coverings and fixings]]
*  [[Private:Theory of panels’ maximum changes]]
*  [[Private:Fixings]]
*  [[Private:Purlins]]
*  [[Private:Small domes and skylights]]
*  [[Private:Sheets metal]]
*  [[Private:Inclinations and grades]]
*  [[Private:Different sheets metal and panels]]
*  [[Private:Transportation]]
 
[[Private:CHAPTER V Materials and profiles]]
 
*  [[Private:Comparison of materials of different standards]]
*  [[Private:Chinese profiles]]
 
[[Private:CHAPTER VI CUSTOMERS STANDARD]]


AutoCAD – illustration details IV–18
*  [[Private:Standard Tabarelli]]
Cugini Malagoli IV–18
*  [[Private:IMAL Srl]] - *  [[Private:IMAL Srl - eng]]
Ballarini Socama IV–18
*  [[Private: MECH Tekla Settings]] - * [[Private:Impostazioni Tekla per Mech]]
Euromeccanica IV–18
Frigorbox IV–18
Mech IV–19
Tabarelli IV–19
Tabarelli suppliers IV–20
Profiles available store (tabarelli) IV–21
Various about modeling IV–22
Staircases and parapets IV–22
Staircases IV–22
Bolts and fixings IV–23
Dowels IV–23
Chemical IV–23
Turnbuckles IV–23
Screws IV–23
Bolts IV–23
Coverings and fixings IV–24
Theory of panels’ maximum changes IV–24
Fixings IV–25
Purlins IV–25
Small domes and skylights IV–28
Sheets metal IV–28
Inclinations and grades IV–31
Different sheets metal and panels IV–31
Transportation IV–31
CHAPTER V Materials and profiles V–1
Comparison of materials of different standards V–1
Chinese profiles V–2
CHAPTER VI CUSTOMERS STANDARD VI–1
Standard Tabarelli bracing system “travetto” VI–1
Bolts, nuts and washers VI–3
Turnbuckle VI–12
Roofage VI–19

Versione delle 07:37, 8 mag 2013

Archive for internal use of Mech srl

www.strutture.info


Consultare la Guida utente per maggiori informazioni sull'uso di questo software wiki.

For starting

Following links are in English language only:

INDEX


Private:CHAPTER I ABOUT HOW TO INSTALL COMPUTERS

Private:CHAPTER II MANAGEMENT OF NETWORK AND COMPUTERS

Private:CHAPTER III ABOUT DETAILING: We have to know…..

Private:CHAPTER IV UTILIZATION OF THE PROVIDED SOFTWARE

  • [[Private:Solid edge ]]
  *  Private:Modeling Process
  *  Private:Make modeling
  *  Private:Check on assembly
  *  Private:Solid Edge Bugs
  *  Private:Reports
  *  [[Private:Setting of solid edge file’s properties	]]
  *  Private:Coding for “cut and perforate” and “welded assemblies”
  *  Private:Ballarini Socama
  *  Private:Euromeccanica
  *  Private:Frigorbox
  *  Private:Tabarelli – MECH – Frigorbox (carpentry)
  *  Private:Setting of solid edge draft files
  *  Private:Settings lines and texts in *.dft
  *  Private:Rescue procedure dft→dwg with colors’ planning
  *  Private:Procedures for solid edge designing
  *  Private:Check in the draft

  *  Private:Cugini Malagoli
  *  Private:Ballarini Socama
  *  Private:Euromeccanica
  *  Private:Frigorbox
  *  Private:Mech
  *  Private:Tabarelli

Private:CHAPTER V Materials and profiles

Private:CHAPTER VI CUSTOMERS STANDARD

Estratto da "https://wiki.strutture.info/index.php?title=Pagina_principale&oldid=1166"